Boxy Brand Watch Winder Mega Systems
System 25B shown below:
Your imagination is the only limit!
Here are some examples (model 27B featured):
With our new heavy duty AC adapter you can now construct systems containing well over 24 bricks;
We have been able to power a 32x brick system with no issues.
You can expand horizontally thus keeping the height at a manageable limit, or if the system is in a low traffic area or better still built in, we have managed to reach a height of 8 bricks high!
You can incorporate the Palettes series with the standard front panel bricks to create a stunning colour impact, setting off your timepieces.
Using the palettes allows you to colour code the TPD for watch movements requiring the same TPD e.g. Use the green palettes for TPD 900-1000, the yellow palettes for watches requiring TPD of 1200 etc.
Or you can sort by rotation direction e.g. CW on the orange palettes, CCW on the black palettes
Or just having fun designing your own personal creation!
We have built up a few mega systems as examples but no doubt you can do much more!
This ready to construct automatic watch winder system for one watch contains everything needed to put it to immediate use
A single AC Adapter powers the brick module. The system can be expanded up to a 12 modules
(Standard AC adapter, up to 24 and more using the new Heavy Duty AC Adapter) unit using our optional Power Extension Board-4, Base Station-4+6 or Timber housing
An acrylic twist-on dome protects your timepiece from dust and allows a clear view of the display
Mirror Gloss Carbon Fibre look front panel
Four electrical contacts on top and bottom of each Brick Automatic Watch Winder allow
the power to be transmitted to each Brick module of the system.
You can add extra Brick modules as your collection grows; one AC Adapter will power up to twelve bricks!
electrical contacts are located top and bottom of bricks
a paper clip is all you need to detach the top contacts protector discs
different cushion orientation allows small/large sizes of straps/bracelets
An acrylic twist-on dome protects your time piece from dust and allows a clear view of the display.
A single AC adapter (included) will power up to twelve Brick Automatic Watch Winders.
Four electrical contacts on top and bottom of each Brick Automatic Watch Winder allow the power to be transmitted to each Brick winder of the system.
672, 960, 1248 TPD (turns per day)
Circuitry logic for the Brick Automatic Watch Winder system:
There are three settings-
1. 672 turns per day (TPD)
The cushion will rotate 28 turns ; it will then rest for approx. 1 hour and then rotate for 28 turns; this cycle repeats
2. 960 TPD
The cushion will rotate 40 turns ; it will then rest for approx. 1 hour and then rotate for 40 turns; this cycle repeats
3. 1248 TPD
The cushion will rotate 52 turns ; it will then rest for approx. 1 hour and then rotate for 52 turns; this cycle repeats
The directional switch can be set to select clockwise, anticlockwise or auto bi-directional rotation
Above settings ensure that the main spring is correctly tensioned and allowed to unwind, similarly to wearing the watch on your wrist
A high quality super silent Mabuchi (Japanese) belt-drive motor ensures almost noiseless operation
Internal light sensors monitor the accuracy of the TPD and rotation position and ensure that the set TPD are achieved regardless of external Voltage fluctuations
Rotations always stop at the same position displaying the watch facing you directly upright!
Most other watch winders do not return to the starting position but are time controlled and will stop at different orientations, sideways or even upside down
Watches not included
WATCHES NOT INCLUDED
Orange Palette watch winder video featured below-
Resting periods not shown; rotations are smooth and gentle