video below does not show extended resting periods
rotations are smooth and gentle
(Orange front panel Palettes Brick shown below)
This ready to construct automatic watch winder system for one watch contains everything needed to put it to immediate use
A single AC Adapter powers the brick module. The system can be expanded up to a 12 modules unit using our optional Power Extension Board-4, Base Station-4+6 or Timber housing
An acrylic twist-on dome protects your timepiece from dust and allows a clear view of the display
Mirror Gloss Carbon Fibre look front panel
Four electrical contacts on top and bottom of each Brick Automatic Watch Winder allow the power to be transmitted to each Brick module of the system.
You can add extra Brick modules as your collection grows; one AC Adapter will power up to twelve bricks!
electrical contacts are located top and bottom of bricks
a paper clip is all you need to detach the top contacts protector discs
different cushion orientation allows small/large sizes of straps/bracelets
An acrylic twist-on dome protects your time piece from dust and allows a clear view of the display. A single AC adapter (included) will power up to twelve Brick Automatic Watch Winders. Four electrical contacts on top and bottom of each Brick Automatic Watch Winder allow the power to be transmitted to each Brick winder of the system.
672, 960, 1248 TPD (turns per day)
Circuitry logic for the Brick Automatic Watch Winder system:
There are three settings-
1. 672 turns per day (TPD)
The cushion will rotate 28 turns ; it will then rest for approx. 1 hour and then rotate for 28 turns; this cycle repeats
2. 960 TPD
The cushion will rotate 40 turns ; it will then rest for approx. 1 hour and then rotate for 40 turns; this cycle repeats
3. 1248 TPD
The cushion will rotate 52 turns ; it will then rest for approx. 1 hour and then rotate for 52 turns; this cycle repeats
The directional switch can be set to select clockwise, anticlockwise or auto bi-directional rotation
Above settings ensure that the main spring is correctly tensioned and allowed to unwind, similarly to wearing the watch on your wrist
A high quality super silent Mabuchi (Japanese) belt-drive motor ensures almost noiseless operation
Internal light sensors monitor the accuracy of the TPD and rotation position and ensure that the set TPD are achieved regardless of external Voltage fluctuations
Rotations always stop at the same position displaying the watch facing you directly upright!
Most other watch winders do not return to the starting position but are time controlled and will stop at different orientations, sideways or even upside down
Watches not included
WATCHES NOT INCLUDED